1. First, adjust the height of the front and back two corners of the tile press machine from the big frame to the upper end of the bottom shaft, and then from one row to the countdown row, find a line to straighten and check whether the lower shaft On a straight line, level the left and right sides of the lower axis horizontally.
2. Find the center of the row and countdown row of the tile press, and then fasten the lock nuts on both sides, draw a straight line in front of and behind the center of the middle wheel, and adjust the gap between the upper and lower shafts. The machine can be adjusted in a straight line.
3. The color steel tile press equipment-the debugging method of the tile press plate deviation, such as the plate runs to the right, pads the left corner (feeding frame), or falls on the right bottom (a few axes run a few axes flat, The upper shaft falls with the bottom shaft
Contact Person: Mr. Arno Hao
Tel: +8618717894416
