With the popularity of the color steel industry, people are no longer unfamiliar with the word tile press. Also, with the unfamiliarity with this word, it is not uncommon for the size of the tile press to have different sizes. Here is how to solve the problem The length of the machine production size varies.
Don’t panic when there are different production sizes of tile presses. There are several solutions:
Check whether the current length of the display screen matches the actual length when the machine stops: If it does, the actual situation is generally greater than the set length, caused by the large inertia of the machine. The solution is to adjust the compensation amount or use the outer wheel coefficient. With inverter models, the deceleration distance can be changed appropriately.
If it does not match, see if the current length is consistent with the set length. If the actual length produced by the tile press is more than the set length, the error is greater than 10mm. This situation is generally caused by the loose encoder. Check carefully and adjust the counter bracket.
If the length and current length are set. The actual lengths of the three are different, and they are very large and irregular. Check whether there are welding machines, signal transmitters, and receiving equipment on site. If there is no such equipment, the encoder may be damaged or the PLC is broken. Please contact the manufacturer at this time. .
Contact Person: Mr. Arno Hao
Tel: +8618717894416
