C-shaped steel machine is a single-roll forming unit with a set of rolls that can produce various specifications of C-shaped purlins. C-shaped steel machine is mainly composed of passive loading rack, leveling device, punching device, cutting device after forming, hydraulic station, computer control system, etc.
C-shaped steel machine The C-shaped purlin finished by the machine has good bending and compression resistance, good straightness, automatic fixed-length cutting, automatic punching, high degree of automation, and quick and convenient installation. The product can be used as the main load-bearing structure of large and medium-sized industrial civil buildings, such as roof load-bearing load and wall support of factory buildings, warehouses, hangars, hangars, exhibition halls, theaters, stadiums, and market gardens.
Technical process of C-shaped steel machine: The strip steel is fed from the rear of the equipment, and pressed by various pressing rollers to form the C-shaped steel machine and sent out from the head. In the traditional process, the C-shaped steel needs to be manually cut to a fixed length after being pressed and then transported to the punching equipment to punch according to the size required by the customer. The production cannot be continuous and the efficiency is not high. After gradually improving the production process, the automatic control of the whole process is finally achieved, which dramatically improves the production efficiency and increases the technical content and added value of customer equipment.
C-shaped steel is an economic cut profile. Due to the reasonable cross-sectional shape, they can make the steel high-efficiency and improve the ability to cut. Different from the general I-shape, the H-shaped wing embroidery has been widened, and the inner and outer surfaces are usually parallel, which can facilitate the connection of high-strength screw and other components. Its size constitutes a reasonable series, complete models, easy to design and choose.
Contact Person: Mr. Arno Hao