Home News

company news about Glazed Roof Tile Machine Advantage

Certification
China Cangzhou Best Machinery Co., Ltd certification
I'm Online Chat Now
Company News
Glazed Roof Tile Machine Advantage
Latest company news about Glazed Roof Tile Machine Advantage

1. Glazed tile equipment with 14 inputs / 10 relay outputs, just meet the input and output requirements. With KDN text screen, you can complete the parameter setting, alarm display, help information, production data display and so on.
3. There are many parameters to be set for the glazed tile equipment, which are set with a text screen. There are two kinds of parameter settings: equipment parameters and user parameter settings. The equipment parameters are: single pulse length, overshoot, pressing distance, pressing time, Cutter time, etc. User parameters are: number of sheets, length, knot, end knot, pitch, number of knots, etc.
3. The molding part of the glazed tile equipment is a hydraulic cylinder that drives the mold to move up and down, which can press the colored steel into many sections, which is like a glazed tile.
4. The execution part of the glazed tile equipment has a frequency converter drive motor, a hydraulic station motor, two hydraulic solenoid valves of the press type, and two hydraulic solenoid valves of the cutter.
The characteristics and uses of the glazed tile pressing machine equipment: the high-level automatic control software is used for the pressing machine equipment to realize the production information management, and the entire unit automation control system uses a highly integrated network to make the performance of the automation system excellent. , Usually between the latter forming roller and the cutting die, if the latter roller of the tile pressing machine cannot effectively support the profile, then when entering the side of the straightening mechanism, the entire profile section is supported, and for asymmetric When straightening, torsion deformation may occur at the same time of straightening.At this time, bending and torsion straightening need to be performed in the opposite direction of the profile deformation.

Pub Time : 2020-04-24 11:32:10 >> News list
Contact Details
Cangzhou Best Machinery Co., Ltd

Contact Person: Mr. Arno Hao

Send your inquiry directly to us (0 / 3000)