Home News

company news about Introduction of Safe Electricity Use for Color Steel Roof Machine

Certification
China Cangzhou Best Machinery Co., Ltd certification
I'm Online Chat Now
Company News
Introduction of Safe Electricity Use for Color Steel Roof Machine
Latest company news about Introduction of Safe Electricity Use for Color Steel Roof Machine

Color steel tile pressing machine

1. Regular inspection and maintenance of electrical equipment according to regulations, and unused electrical equipment wiring should be removed.

2. When there is a power outage in the department, when there is an electric body less than 0.9 meters away from the inspection staff, dry wood rubber or insulating materials must be used for reliable temporary shelter

3. When it is found that the conductive part of the pressure tile is grounded, before the power supply is blocked, all persons except the rescue electric shock are not allowed to approach, 4 meters away from the neighborhood, and 1.8 meters away from the room to avoid stepping voltage damage.

4. When repairing the tile press equipment, pull down the switch and the knife, and it is necessary to hang the warning sign "No closing, someone is working" on the switch and the knife, on the fence of the live equipment and the passage where the passage is prohibited , The warning sign of "stop, high voltage danger" should be hung, and the warning sign of "someone is working here" should be hung on the work place.

5. Electricians must know the types and functions of the electrical circuits and electrical equipment in the workshop, and do not fully understand the functions of electrical equipment, so it is forbidden to take risks

6. The electrician should check the cable, motor, electric console and other equipment on a daily basis. If any problems are found during the inspection, they must be dealt with in a timely manner. When checking the temperature of the motor, first check that there is no electricity, and then test with the back of the hand.

7. Except for temporary construction electricity or temporary measures, it is not allowed to set up temporary wires, or to hang lights, instrument tools and welding machines, and other applied switches and sockets. The original electrical circuit shall not be changed without authorization.

8. The equipment is connected to the ground wire.

Pub Time : 2020-05-16 09:15:57 >> News list
Contact Details
Cangzhou Best Machinery Co., Ltd

Contact Person: Mr. Arno Hao

Send your inquiry directly to us (0 / 3000)