Home News

company news about Structure And Characteristics Of Hydraulic Bending Machine

Certification
China Cangzhou Best Machinery Co., Ltd certification
I'm Online Chat Now
Company News
Structure And Characteristics Of Hydraulic Bending Machine

1.First turn on the power, turn on the key switch on the control panel, and then press the oil pump to start, so you can hear the sound of the oil pump rotating. (The machine does not move at this time)
2. Followed by stroke adjustment, the use of bending machine must pay attention to adjust the stroke, must be tested before bending. When the upper die of the bending machine descends to the bottom, there must be a gap of plate thickness. Otherwise it will cause damage to the mold and machine. The adjustment of the stroke is also electric fast adjustment and manual stomach adjustment.
3. The next step is the selection of bending notch. Generally, the notch with a width of 8 times the thickness of the plate should be selected. For bending a 4mm sheet, a notch of around 32 is required.

Pub Time : 2020-04-26 09:28:49 >> News list
Contact Details
Cangzhou Best Machinery Co., Ltd

Contact Person: Mr. Arno Hao

Send your inquiry directly to us (0 / 3000)