Home News

company news about Decking Floor Sheet Machine Models

Certification
China Cangzhou Best Machinery Co., Ltd certification
I'm Online Chat Now
Company News
Decking Floor Sheet Machine Models
Latest company news about Decking Floor Sheet Machine Models

1. The thickness of the profile is mainly based on the thickness of the floor concrete and the spacing of the secondary beams. The calculation method is very technical. It is calculated based on the relevant data such as the section modulus and section moment of inertia of the floor slab.
2. The profile is made of cold-rolled steel plate (coil). The common specifications of the thickness of the steel plate are 0.75mm, 1.0mm and 1.2mm. When the thickness of the steel plate is greater than 1.2mm, the forming is difficult. The main problem is that the stud cannot be penetrated. The profiled steel plate and the steel beam are firmly connected, so it is recommended that the floor support plate thickness should not be greater than 1.5mm.

Pub Time : 2020-06-01 09:01:27 >> News list
Contact Details
Cangzhou Best Machinery Co., Ltd

Contact Person: Mr. Arno Hao

Send your inquiry directly to us (0 / 3000)