Color steel tile presses are high-efficiency and economical profile cutting profiles (others include cold-formed thin-walled profiled steel profiles and profiled steel plates, etc.). Due to their reasonable cross-sectional shapes, they enable the steel to perform more efficiently and improve the ability to cut. Different from the general I-shape, the H-shaped wing embroidery has been widened, and the inner and outer surfaces are usually parallel, which can facilitate the connection of high-strength screw and other components. Its size constitutes a reasonable series, complete models, easy to design and choose. Unlike the color steel plate forming machine, it is hydraulically powered and has a large power, generally around 22KW, similar to the shearing and bending machine. The general control process is complicated, and PLC control is mostly used.
Color steel equipment refers to color-coated steel plates. The traditional coatings are divided into several categories. The most high-end ones are fluorocarbon coatings, which can be corrosion-resistant for almost 20 years. It is generally distributed from steel mills to various places in the form of reels. The color steel plate we often see refers to the processed plate pressing machine, the thickness is about 50 ~ 100mm, it is composed of the filler in the middle and the color steel plate on both sides. Due to the special profiles, the construction of the factory building made of steel plates is very fast (such as the Xiaotangshan Hospital during SARS), but the strength is low. In the use of color steel equipment, the connection between the keels is simple: after the boom is fixed on the floor with a burst bolt, the T-type keel suspension is used to connect the T-type main keel. If the T-type keel needs to be extended, it is at its interface. It is fixed with a T-shaped keel connector. The secondary keel and the main keel are connected by plug-in connection. No accessories are required. If the ceiling has an additional load or a large-area ceiling, a U-shaped keel is required, that is, after the boom is installed First, connect the U-shaped main keel to the boom with a U-shaped bearing keel (main keel) hanger, and then connect the T-shaped longitudinal keel to the U-shaped main keel with a T-shaped keel hanger. Many steel roofs are now using color steel equipment, color steel tile machine has a single layer and sandwich. Some people say that the single-layer color steel tile is steamed in summer, it is too hot to be able to bear, it is not insulated in winter, and it is not cold enough, even if it is done, the effect of the ceiling is not good. In fact, the use of single-layer color steel tile pressing machine will have a simple way to cool down in summer. The color steel tile pressing machine is a single-roll forming unit with a set of rollers that can produce various specifications of finished tile purlins. The machine is mainly composed of passive loading rack, leveling device, punching device, cutting device after forming, hydraulic station, computer control system, etc. This machine adopts automatic flying saw punching, easy operation and other characteristics.
Contact Person: Mr. Arno Hao