company news about Fixing Method Of Tile Roll Forming Machine

Fixing method of tile pressing machine:

The color steel tile equipment also needs to be fixed. If it cannot be fixed well, it will cause deviations in the production process. If there are deviations, the quality of the products produced is also unqualified. Therefore, it is very important to fix the color steel tile equipment.

Color steel tile equipment is mainly to fix the upper shaft and upper roller, which will reduce the problems in the production process to a certain extent, but if you want to fix the equipment, it is still not enough. It is also necessary to fix the lower shaft and the lower roller, so that the connecting plate and the bearing seat can be better linked. If these basic components cannot be stabilized, it is impossible to stabilize a complete machine. If these parts are stable and proper, then you also need to pay attention to that the board must avoid empty bending as much as possible during the forming process, which may cause deformation of the product.

Finally remind you that after following the above points, you should also pay attention to the overall symmetry and accuracy of the device. If it is found that the machine is not symmetrical after it is stabilized, it is also impossible. This may also affect the production. Only after all the considerations have been made, can the machine be used to produce qualified products.