1. Before using the machine, be sure to check whether there are any loose parts in the machine. If there are moving parts, they must be tightened to avoid accidents. Check whether the power supply, bolts are tightened, and whether there is organic oil in the chassis
2. Clean up the garbage and iron bars around the machine, and don't put useless things beside the machine. Check if something is stuck and clean up in time
3. Regularly check the machine for heat, noise and other abnormal phenomena every day. If any abnormality is found, it should be checked in time.
4. The machine should pay attention to moisture and try to place it indoors. Avoid premature aging. For example, put anti-rust oil on the roller for a long time, and grease on the chain.
5. In the process of using the equipment, people should feed and discharge materials within 5 meters, to prevent people from approaching, so as not to cause injury
6. During the operation of the oil pump motor, it is strictly forbidden for people to handle near the cutting position.
7. It is strictly forbidden to extend the hand into the test plate of the press shaft before the press machine is stopped
Contact Person: Mr. Arno Hao
Tel: +8618717894416
