Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— Moyo
—— Octavio
—— Cristian
—— Spence
—— Samuel
—— Ali
Material introduction and fixing method of tile press:
Fixing method of tile press:
The color steel tile equipment also needs to be fixed. If it is not fixed well, it will lead to deviations in the production process. If there is a deviation, the quality of the products produced is also unqualified. Therefore, the fixing of the color steel tile equipment is very important.
The color steel tile equipment is mainly to fix the upper shaft and the upper roller, which will reduce the problems in the production process to a certain extent, but if you want to fix the equipment, it is far from enough. It is also necessary to fix the lower shaft and the lower roller, so that the connecting plate and the bearing housing can be better linked. If these basic components cannot be stabilized, it is even more impossible to stabilize a complete machine. If these parts are stable and proper, you also need to pay attention to avoiding empty bending as much as possible during the forming process of the plate, which is likely to cause deformation of the product.
The last thing to remind you is that after following the above points, you should also pay attention to the overall symmetry and accuracy of the equipment. If the machine is found to be asymmetry after it is stabilized, it is also not possible. This may also affect production. Only when everything is considered can it be possible to use the machine to produce qualified products.