The glazed tile pressing machine is divided into three parts, roller forming part, pressing part and cutter part.
The forming part of the roller table is driven by the motor, and the chain drives the rollers to rotate. The pressing part is that the hydraulic cylinder drives the mold to move up and down, which can press the color steel into many knots, like a glazed tile. The cutter part is driven by the hydraulic cylinder to move the cutter up and down, which can cut off the colored steel tiles.
The production process is as follows: the color steel plate enters the roller forming part, after forming, it is pressed to the embossing part and pressed into equal distances one by one. The cutter is responsible for cutting at a fixed length.
The execution part has inverter drive motor, hydraulic station motor, two hydraulic solenoid valves of pressure type, and two hydraulic solenoid valves of cutter.
The detection part includes: pulse encoder for detecting the length of the color steel tile, the up and down stroke switch of the profile, the up and down stroke switch of the cutter, the up and down operation button of the profile, the up and down stroke button of the cutter, the emergency stop switch, the hydraulic start and stop switch and many more.
PLC uses KDN-K306-24AR of KDN-K3 series. It has 14 inputs / 10 relay outputs, which just meet the input and output requirements. With KDN text screen, you can complete parameter setting, alarm display, help information, production data display and so on.
The glazed tile press uses high number pulse input function, KDN-K306-24AR high number input performance is excellent, and the AB phase selection has strong anti-interference ability. And use the fixed value interrupt function to ensure accuracy.
The tile press has many parameters to be set, use text screen to set. There are two types of parameter settings: device parameters and user parameter settings. The equipment parameters are: single pulse length, overshoot, pressing distance, pressing time, cutting time and so on. User parameters are: number of sheets, length, first section, last section, pitch, number of sections, etc.
Glazed tile pressing machine control system can also complete the veneer cutting function.
Contact Person: Mr. Arno Hao