|
Product Details:
|
| Name: | Automatic Interchangeable C AND Z Purlin Roll Forming Machine With Punching Hole | Production Capacity: | 10-20m/min |
|---|---|---|---|
| Voltage: | 380V,220V,440V | Hydraulic Pressure: | 16Mpa |
| Place Of Origin: | Hebei,China | Power: | 22kw |
| Material Thickness: | 1.0-3.0mm | Control System: | PLC Control |
| High Light: | c channel roll forming machine,steel frame roll forming machine |
||
Automatic Interchangeable C AND Z Purlin Roll Forming Machine With Punching Hole
1. Machine details:
2.Technical Parameters (depending on specific requirements of users)
| 1. | Configurations | Manual Uncoiler, Guiding Platform, 9 Shaft Strip Leveler, Main Machine Of Roll Forming, Hydraulic Motor, Pre-Punching Device,Pre-Cutting Device, Hydraulic Station, PLC Control, Supporter Table. |
| 2. | Control System | PLC Inverter Encoder Touch Screen |
| 3. | Main Frame | 400mm H-Beam |
| 4. | Total Power | 22 kw |
| 5. | Power Supply | 380V, 3-Phase,50Hz |
| 6. | Forming Speed | 12-24m/min |
| 7. | Roll Station | 18 stands or custom |
| 8. | Roller Diameter | 80mm |
| 9. | Effective Width | 80-300mm |
| 10. | Feeding Thickness | 1.5-3.0mm |
| 11. | Backboard Thickness | 20mm |
| 12. | Cutter Standard | GCr12 |
| 13. | Roller Standard | Gcr15# |
| 14. | Overall Size | About 8500×1000×1400mm |
| 15. | Total Weight | About 10T |
3.Component
| NO. | Item | Unit | Qty |
| 1 | Manual decoiler | set | 1 |
| 2 | Main roll forming machine | set | 1 |
| 3 | PLC control box | set | 1 |
| 4 | Supporter table | set | 1 |
Another quick-change “C” and “Z” purlin mill is forming one edge of the product up. At the other edge no need adjust, the top and bottom rolls can be easily exchanged by either rotating each stand 180º around a shaft or deflecting one leg up for the C Purlin or down for the Z Purlin . These designs enable the production of “C” and “Z” Purlins on the same machine without tool change.
The whole line is containing prepunching or post punch and cutting presses can produce infinite kinds of “C” channels (studs) and “U” channels (tracks) within the parameter of the machine without tool change. Frequently, the only requirement is to enter the part number (or dimensions)and the required quantities into the PLC or Computer system by Touch Screen . The product dimension changeover time can be as low as 1 to 2 min.
6.Features of CZ Purlin Roll forming Machine:
C/Z purlin interchangeable rollformer can produce C, Z profiles. Produce from C to Z purlin by switch one side roller, only need about 15 minutes. This machine also can adjust roller horizontal distance to achieve C or Z purlins of the width with high precision automatic. And also save time and increase production.
7.Our service:
Terms of Payment: 30% of the total contract value paid by T/T as down payment, the rest 70% of the total contract value to be paid by T/T after inspection by buyer in seller's factory while before delivery.
Delivery: 30 days after receipt of advance payment
Service: we send technician to your country to fix the machine.The buyer should bear all the cost including: visa, Round trip tickets and suitable accommodation, also buyer should pay salary 100USD/day.
Warranty: 24 months limited warranty
During warranty: parts are free but buyer pay for the shipping fee.
Contact Person: Anne Song
Tel: +8618045013499
