This Color Steel Sheet Double Layer Roof And Wall Roll Forming Machine is perfectly combined two different-model machines together, this can save the space and also is easy to operate. The two models are chose according to customers" need. This kind of machine make two type of tile together ... Read More
|
Corrugated is the traditional and familiar S-Rib profile for roofing and cladding applications. It is the oldest and most commonly used roofing profile because of its easy handling and fixing properties and related strength. The S-rib is derived from sinus curve and offers very strong and structural ... Read More
|
1. What are the types of substrates of color steel veneer? The substrates of color steel veneer are cold-rolled substrate, hot-dip galvanized substrate and electro-galvanized substrate. 2. What are the types of color steel veneer coating? The coating of color steel veneer can be divided into ... Read More
|
We are making active preparations for the Canton Fair. Welcome to join us. Read More
|
In the use of the color steel tile press machine, the connection between the keels is simple: after the boom is fixed on the floor with a burst bolt, the T-type keel hanger is used to connect the T-type main keel. The interface is fixed with a T-shaped keel connector. The secondary keel is connected ... Read More
|
The tile pressing machine will be equipped with a set of lubrication system. When the machine is running, it will automatically lubricate all bearing bearings and the moving guide rails of the transmission gear mechanism. Automatic unloading and blank taking work procedures: the mold installation ... Read More
|
During the production process, the equipment will affect the production due to wear and damage to the parts. If there is a problem with the equipment, it will inevitably affect the production of the color plate. Therefore, once the electrician finds an unexpected situation in the operation of the ... Read More
|
1. The thickness of the profile is mainly based on the thickness of the floor concrete and the spacing of the secondary beams. The calculation method is very technical. It is calculated based on the relevant data such as the section modulus and section moment of inertia of the floor slab. 2. The ... Read More
|
Highway Guardrail Machine is mainly used for the extrusion molding of highway guardrail boards, which is characterized by high production efficiency and high strength of guardrail products. High-speed guardrail plate forming equipment is mainly composed of uncoiler, leveling machine, punching ... Read More
|
The glazed tile pressing machine is divided into three parts, roller forming part, pressing part and cutter part. The forming part of the roller table is driven by the motor, and the chain drives the rollers to rotate. The pressing part is that the hydraulic cylinder drives the mold to move up and ... Read More
|